ANALYSIS OF BIOTRIBOLOGY CHARACTERISTICS AND RELATIONSHIP BETWEEN METAL SLEЕVE AND SURGICAL GUIDE
DOI:
https://doi.org/10.24867/22RB02MijukKeywords:
surgical guide, metal sleeves, FEM, surface roughness, reverse engineeringAbstract
This master's thesis presents a case study in which relationship of previously designed variations of metal sleeves for a customized surgical guide of the molar region was analyzed using static analysis by finite element method. The tribological influence was also analyzed in the form of an analysis of the parameters of the surface roughness of the metal sleeve. Based on the results of this research, it was concluded that there are no significant stresses and strains when placing the metal sleeve in the surgical guide.
References
[1] Bronzino, J.D., Peterson, D.R., “The Biomedical Engineering Handbook, Third Edition“, CRC Press, 2006.
[2] I. Budak, “Reverzibilni inženjerski dizajn – preprocesiranje rezultata 3D digitalizacije“, Fakultet tehničkih nauka, Novi Sad, 2019.
[3] F. Rengier, A. Mehndiratta, H. von Tengg-Kobligk, C.M. Zechmann, R.Unterhinninghofen, H.U.Kauczor, F.L.Giesel, “3D printing based on imaging data: review of medical applications“, International Journal of Computer Assisted Radiology and Surgery, vol. 5, pp. 335-341, 2010.
[4] https://www.academia.edu/31334775/Metoda_konacnih_elemenata_Uvod (pristupljeno oktobar 2022.)
[5] N. Korunović, M. Trajanović, M. Mitković, and S. Vulović, "Od CT snimka do modela za analizu naponskog stanja u femuru primenom metoda konačnih elemenata," IMK-14 - Istraživanje i razvoj, vol. 16, no. 2, pp. 45-48, 2010.
[6] M. Šljivić, M. Stanojević., D. Đurđević, N. Grujović, A. Pavlović, “Implementacija MKE metode i rapid prototajpinga u maksilofacijalnoj hirurgiji“, FME Transactions, vol. 44, no. 4, pp. 422-429, 2016.
[7] A. Mijuk, “Dizajn i izrada kastomizovanog hirurškog gajdera molarne regije primjenom reverzibilnog inženjerstva, diplomski rad“, Novi Sad 2021.
[8] V. Arora, S. Kumar, P. Kalra, A. Goyal, “Finite element analysis of dental implant surgical guides”, Materials Today: Proceedings, vol. 56, no. 5, pp. 3137-3141, 2022.
[2] I. Budak, “Reverzibilni inženjerski dizajn – preprocesiranje rezultata 3D digitalizacije“, Fakultet tehničkih nauka, Novi Sad, 2019.
[3] F. Rengier, A. Mehndiratta, H. von Tengg-Kobligk, C.M. Zechmann, R.Unterhinninghofen, H.U.Kauczor, F.L.Giesel, “3D printing based on imaging data: review of medical applications“, International Journal of Computer Assisted Radiology and Surgery, vol. 5, pp. 335-341, 2010.
[4] https://www.academia.edu/31334775/Metoda_konacnih_elemenata_Uvod (pristupljeno oktobar 2022.)
[5] N. Korunović, M. Trajanović, M. Mitković, and S. Vulović, "Od CT snimka do modela za analizu naponskog stanja u femuru primenom metoda konačnih elemenata," IMK-14 - Istraživanje i razvoj, vol. 16, no. 2, pp. 45-48, 2010.
[6] M. Šljivić, M. Stanojević., D. Đurđević, N. Grujović, A. Pavlović, “Implementacija MKE metode i rapid prototajpinga u maksilofacijalnoj hirurgiji“, FME Transactions, vol. 44, no. 4, pp. 422-429, 2016.
[7] A. Mijuk, “Dizajn i izrada kastomizovanog hirurškog gajdera molarne regije primjenom reverzibilnog inženjerstva, diplomski rad“, Novi Sad 2021.
[8] V. Arora, S. Kumar, P. Kalra, A. Goyal, “Finite element analysis of dental implant surgical guides”, Materials Today: Proceedings, vol. 56, no. 5, pp. 3137-3141, 2022.
Downloads
Published
2023-04-06
Issue
Section
Biomedical Engineering
