DEVELOPMENT OF AUTOMATED MACHINE FOR HOUSE PET FEEDING
DOI:
https://doi.org/10.24867/23GI25VasovicKeywords:
Non-Industrial automation, MQTT, Control, 3D-printingAbstract
The subject of this master thesis is development of automated system for house pet feeding using IoT and 3D printing technologies. Practical knowledge in fields of electronics, software development and mechanical CAD model making is used.
References
[1] https://www.techtarget.com/iotagenda/definition/MQTT-MQ-Telemetry-Transport
[2] https://www.hubs.com/guides/3D-printing/
[3] https://www.espressif.com/en/products/socs/esp32
[4] https://learn.sparkfun.com/tutorials/i2c/all
[5] https://docs.arduino.cc/hardware/nano
[6] https://www.allegromicro.com/en/products/motor-drivers/brush-dc-motor-drivers/a4988
[7] https://www.analog.com/media/en/technical-documentation/data-sheets/DS1307.pdf
[8] https://en.wikipedia.org/wiki/Peristaltic_pump
[2] https://www.hubs.com/guides/3D-printing/
[3] https://www.espressif.com/en/products/socs/esp32
[4] https://learn.sparkfun.com/tutorials/i2c/all
[5] https://docs.arduino.cc/hardware/nano
[6] https://www.allegromicro.com/en/products/motor-drivers/brush-dc-motor-drivers/a4988
[7] https://www.analog.com/media/en/technical-documentation/data-sheets/DS1307.pdf
[8] https://en.wikipedia.org/wiki/Peristaltic_pump
Downloads
Published
2023-08-02
Issue
Section
Industrial Engineering and Management
