INDUSTRIAL VARIABLE SPEED DRIVE PERFORMANCES ANALYSIS IN POWER SUPPLY OPERATING LIMITS

Authors

  • Slaviša Vasić Autor
  • Dragan Mitar Milićević Univerzitet u Novom Sadu, Fakultet tehničkih nauka Autor

DOI:

https://doi.org/10.24867/18BE01Vasic

Keywords:

Variable frequency drive, induction machine

Abstract

Industrial variable frequency drive performance at reduced or increased supply voltage by 10 % and 20 % is presented in this paper. A practical test was conducted on two mechanically coupled induction machines powered by two variable frequency drives. The variable frequency drive whose performance is being tested is Danfoss FC302, and the drive whose role is to supply the second machine is ABB ACS880. DC bus supply voltage for the tested drive is provided by the Cinergia B2C+. Operation of the drive was conducted for different control principles, U/f, VVC+, and vector control principle.

References

[1] Marko Vekić, Kvalitet električne energije, Fakultet tehničkih nauka, Novi Sad predavanja, 2021.
[2] Slobodan N. Vukosavić, Električne mašine, Akademska misao, Beograd, 2010.
[3] Veran Vasić, Đura Oros, Energetska elektronika u pogonu i industriji, FTN izdavaštvo, Novi Sad, 2012.
[4] Zvonko Benčić, Boris Košuljandić, Najvažnije o frekvencijskim pretvaračima, Zagreb, 2009.
[5] Darko P. Marčetić, Mikroprocesorsko upravljanje energetskim pretvaračima, FTN izdavaštvo, Novi Sad, 2014.
[6] Končar – Mes d. d. Elektromotori, katalog, 2019.
[7] Cinergia – Bidirectional Battery Charger (B2C+), Installation and operation manual.
[8] Danfoss drives, Operating Guide.
[9] ABB ACS880, Firmware manual.

Downloads

Published

2022-07-04

Issue

Vol. 37 No. 07 (2022): Proceedings of Faculty of Technical Sciences

Section

Electrotechnical and Computer Engineering