IRRIGATION PROJECT BY COMBINATION OF CENTER PIVOT AND RANGER SYSTEM IN KULPIN

Authors

  • Ivan Dudaš Autor

DOI:

https://doi.org/10.24867/16CG15Dudas

Keywords:

Irrigation equipment, ETP, hydraulic module, HDPE pipes, Water hammer

Abstract

The paper can be divided into two parts, theoretical - research and practical. In the theoretical - research part, the climatic conditions for determining evapotranspiration and water deficit are analyzed, while in the practical part hydrological and hydraulic calculations are processed. In the hydrological part, the hydromodule was calculated as the basis of each irrigation system, and in the hydraulic part, the calculation and dimensioning of the pumping station and pipeline was done. In the end, after a detailed analysis, the best technical - ecological - economic solution has been adopted.

References

 https://www.valleyirrigation.com/
 http://www.bsb-agro.com/
 http://www.fao.org/land-water/databases-and-software/cropwat/en/
 https://pestan.net/sr/pe-voda/
 Prof. dr Dušan Uzelac: Hidromašinska oprema, autorizovana predavanja 2013.godina.
 Prof. dr Kolaković Srđan: Hidrotehničke melioracije – navodnjavanje skripta, Novi Sad – Fakultet tehničkih nauka 2006.godina.
 Prof. dr Kolaković Srđan: Hidrotehničke melioracije – odvodnjavanje, Univerzitet u Novom Sadu, 2006.godina

Downloads

Published

2022-01-05

Issue

Vol. 37 No. 01 (2022): Proceedings of the Faculty of Technical Sciences

Section

Civil Engineering