DEVELOPMENT AND CONFIGURATION OF 3D PRINTER
DOI:
https://doi.org/10.24867/16IH01KozomoraKeywords:
Additive Manufacturing, FDM technology, 3D printingAbstract
The paper develops and successfully implements a 3D printer. The process of configuring the firmware is described, as well as the detailed calibration procedure that is necessary to obtain a quality print. The method of remote control of the 3D printer is shown.
References
[1] Movrin D.: Optimizacija parametara postprocesiranja u tehnologiji vezivne 3D štampe, Doktorska disertacija, Novi Sad, 2017.
[2] Stankovski S., Ostojić G., Šaponjić M., Stanojević M., Babić M.: Using micro/mini PLC/PAC in the Edge Computing Architecture (DOI:10.1109/ INFOTEH48170.2020.9066309), 19. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: IEEE Explore, 18-20 March, 2020, pp. 1-4
[3] Stankovski S., Ostojić G., Baranovski I., Babić M., Stanojević M.: The Impact of Edge Computing on Industrial Automation (DOI: 10.1109/INFOTEH48170.2020.9066341), 19. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: IEEE Explore, 18-20 March, 2020, pp. 1-4
[4] Tarjan L., Šenk I., Erić Obućina J., Stankovski S., Ostojić G.: Extending Legacy Industrial Machines by a Low-Cost Easy-to-Use IoT Module for Data Acquisition (doi:10.3390/sym12091486), Symmetry, 2020, Vol. 12, No. 1486, pp. 1-16, ISSN 2073-8994
[5] https://marlinfw.org/docs/basics/introduction.html, pristupljeno dana: 06.05.2021.
[6] https://www.thingiverse.com/thing:1278865, pristupljeno dana: 03.03.2021.
[7] Peulić A., Čučej Ž.: Daljinsko upravljanje i komunikacije, Kragujevac: Istraživačko razvojni centar za bioinženjering, 2010.
[8] https://octoprint.org/, pristupljeno dana: 02.06.2021.
[2] Stankovski S., Ostojić G., Šaponjić M., Stanojević M., Babić M.: Using micro/mini PLC/PAC in the Edge Computing Architecture (DOI:10.1109/ INFOTEH48170.2020.9066309), 19. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: IEEE Explore, 18-20 March, 2020, pp. 1-4
[3] Stankovski S., Ostojić G., Baranovski I., Babić M., Stanojević M.: The Impact of Edge Computing on Industrial Automation (DOI: 10.1109/INFOTEH48170.2020.9066341), 19. Međunarodni naučno-stručni simpozijum INFOTEH-JAHORINA, Jahorina: IEEE Explore, 18-20 March, 2020, pp. 1-4
[4] Tarjan L., Šenk I., Erić Obućina J., Stankovski S., Ostojić G.: Extending Legacy Industrial Machines by a Low-Cost Easy-to-Use IoT Module for Data Acquisition (doi:10.3390/sym12091486), Symmetry, 2020, Vol. 12, No. 1486, pp. 1-16, ISSN 2073-8994
[5] https://marlinfw.org/docs/basics/introduction.html, pristupljeno dana: 06.05.2021.
[6] https://www.thingiverse.com/thing:1278865, pristupljeno dana: 03.03.2021.
[7] Peulić A., Čučej Ž.: Daljinsko upravljanje i komunikacije, Kragujevac: Istraživačko razvojni centar za bioinženjering, 2010.
[8] https://octoprint.org/, pristupljeno dana: 02.06.2021.
Downloads
Published
2022-03-05
Issue
Section
Mechatronics
