THE USE OF 3D SCANNING IN PROSTHETICS
DOI:
https://doi.org/10.24867/22RB04JefticKeywords:
3D Scanner, Geometric Reconstruction, Prosthetics, GOM Inspect, Finite Element AnalysysAbstract
In this paper is presented the application of 3D scanning technology to the prosthesis of the lower extremities, and geometric reconstruction of the models obtained with the aforementioned technology. The processing of the obtained recordings and the geometric reconstruction of the model were done through the functionality of the GOM Inspect software. Specifically, in this work, the existing socket of the transfemoral (above knee) prosthesis was scanned as well as its residual limb, with the aim of continuing research into the application of additive technology in the construction of the socket, which would significantly speed up and improve the production process.
References
[1] Andrea Vitali, Caterina Rizzi, Daniele Regazzoni, Giorgio Colombo, ‘Design and Additive Manufacturing of Lower Limb Prosthetic Socket’, ASME 2017 International Mechanical Engineering Congress and Exposition, November 2017
[2] https://voxellab.rs/3d-skeniranje/ (pristupljeno u septembru 2022.)
[3] https://www.rodin4d.com/en/structure-sensor/ (pristupljeno u septembru 2022.)
[4] https://www.gom.com/en/products/zeiss-quality-suite/gom-inspect-pro/features-gom-software (pristupljeno u septembru 2022.)
[5] https://www.aspose.com/ (pristupljeno u septembru 2022.)
[6] Milica J. Tufegdžić, ‘Kreiranje zapreminskog 3D modela karlične kosti čoveka u uslovima nepotpunih ulaznih volumetrijskih podataka’, Univerzitet u Nišu, Mašinski fakultet u Nišu, doktorska disertacija, Niš 2017.
[7] Northwestern University, Prosthetics-Orthotics Center, Center for International Rehabilitation, ‘Uzdužno-ovalno ležište, Serija protetičkih modula’, 2004, skripta
[2] https://voxellab.rs/3d-skeniranje/ (pristupljeno u septembru 2022.)
[3] https://www.rodin4d.com/en/structure-sensor/ (pristupljeno u septembru 2022.)
[4] https://www.gom.com/en/products/zeiss-quality-suite/gom-inspect-pro/features-gom-software (pristupljeno u septembru 2022.)
[5] https://www.aspose.com/ (pristupljeno u septembru 2022.)
[6] Milica J. Tufegdžić, ‘Kreiranje zapreminskog 3D modela karlične kosti čoveka u uslovima nepotpunih ulaznih volumetrijskih podataka’, Univerzitet u Nišu, Mašinski fakultet u Nišu, doktorska disertacija, Niš 2017.
[7] Northwestern University, Prosthetics-Orthotics Center, Center for International Rehabilitation, ‘Uzdužno-ovalno ležište, Serija protetičkih modula’, 2004, skripta
Downloads
Published
2023-04-06
Issue
Section
Biomedical Engineering
