INVESTIGATION OF BIOTRIBOLOGY AND DIMENSIONAL CHARACTERISTICS OF POLYMETHYL METHACRYLATE FOR APPLICATION IN DENTAL PROSTHETICS
DOI:
https://doi.org/10.24867/22RB03AbeerKeywords:
friction, kinematic friction coefficient, CAD Inspection, polymethyl methacrylate, dental prosthesesAbstract
The results of measuring the kinematic friction coefficient on polymethyl methacrylate, as well as the results of dimensional analysis in the form of CAD inspection, are presented in this master thesis. The measurement of the konematic friction coefficient was carried out using the "disk-block" friction pair method. Experimental tests were performed for different values of normal load on cylinders made of polymethyl methacrylate that were exposed to increased temperature for their polymerization. Based on the results, it can be concluded that the arithmetic mean value of the kinematic coefficient of friction decreases with increasing force, while for the CAD inspection results, based on the standard deviation, it was established that there are certain deviations present.
References
[2] http://tribolab.mas.bg.ac.rs/tribologija.htm (pristuplje-no u oktobru 2022).
[3] Radenko Blažević: Tribodijagnostika kinematskog koeficijenta trenja metodom blok na disku, master rad, Novi Sad – Fakultet tehničkih nauka, oktobar 2018
[4] Muhammad Sohail Zafar: Prosthetic Applications of Polymethyl Methacrylate (PMMA): An Update, Polymers, vol. 12, no. 10., pp. 1-35, 2020.
[5] https://en.wikipedia.org/wiki/3D_scanning (pristuplj- eno u oktobru 2022).
[6] https://en.wikipedia.org/wiki/Poly(methyl_methacryla te) (pristupljeno u oktobru 2022)
[7] Vukelić Đ., Santoši Ž., Šokac M., Budak I., Šarić T., Šimunović G., Tadić B.: Evaluation of the kinetic friction coefficient by using „disc-block“ friction pair of different wooden samples, 16. International Conference on Tribology - SERBIATRIB, Kragujevac: Faculty of Engineering, 15-17 May, pp. 287-292, 2019.
