IMPLEMENTATION OF PROFINET PROTOCOL FOR INDUSTRIAL DEVICES

Authors

  • Srđan Milošević Autor

DOI:

https://doi.org/10.24867/23IH01Milosevic

Keywords:

PROFINET, TIA Portal, Xilinx, Zynq HIL

Abstract

The paper presents the development of PROFINET protocol on Hardware  In the Loop (HIL) devices. The characteristics and specifics of the PROFINET protocol are given. The realization of the application and the graphical interface for PROFINET, the way of configuring devices in the TIA Portal, as well as the way of establishing communication between devices, are described. The correctness of the implemented protocol in the Typhoon HIL programming environment was tested, and the results of the PROFINET protocol testing were given.

References

[1] S. Stankovski, G. Ostojić, M. Šaponjić, M. Stanojević, M. Babić: Using micro/mini PLC/PAC in the Edge Computing Architecture (DOI:10.1109/INFOTEH48170.2020.9066309), IEEE Explore, 18-20 March, 2020, pp. 1-4
[2] S. Stankovski, G. Ostojić, I. Baranovski, M. Babić, M. Stanojević: The Impact of Edge Computing on Industrial Automation (DOI:10.1109/INFOTEH48170.2020.9066341), IEEE Explore, 18-20 March, 2020, pp. 1-4
[3] B. M. Wilamowski, J. D. Irwin, The Industrial Electronics Handbook – Industrial Communication Systems, Taylor & Francis Group, 2018.
[4] L. H. Crockett, et al., The Zynq book, Department of Electronic and Electrical Engineering, University of Strathclyde, Jul 2014, pp. 1-2; 133-134
[5] R. Zurawski, The Industrial Communication Technology Handbook, CRC Press, 2005.
[6] Internet stranica PROFINET grupe, https://www.profibus.com/ (pristupljeno u januaru 2021.)

Published

2023-08-02