Abstract
This thesis presents the development of an automated smart parking system, based on NFC/RFID user identification. The system integrates sensors, actuator mechanisms, a programmable controller, and visual indicators of occupancy. Special emphasis is placed on PCB design, software architecture and 3D model prototyping. The system also supports external control, enhancing its functional capabilities. The paper describes all development phases – from hardware organization and communication protocols, through software algorithms, to 3D model design and the application for external management.
References
- [1] H. Kareem, D. Dunaev, "The Working Principles of ESP32 and Analytical Comparison of using Low-Cost Microcontroller Modules in Embedded Systems Design," 2021 4th International Conference on Circuits, Systems and Simulation (ICCSS), Kuala Lumpur, Malaysia, 2021, pp. 130-135, doi: 10.1109/ICCSS51193.2021.9464217.
- [2] Espressif ESP32-DevKit-C V4 development board, https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32/esp32-devkitc/user_guide.html (приступљено у јуну 2025.)
- [3] Light Dependent Resistor (LDR), https://www.electronicsforu.com/technology-trends/learn-electronics/ldr-light-dependent-resistors-basics (приступљено у јуну 2025.)
- [4] Nak-Gwon Choi, Hyuek-Jae Lee, Sang-Hoon Lee and Seong-jeen Kim, "Design of a 13.56 MHz RFID system," 2006 8th International Conference Advanced Communication Technology, Phoenix Park, 2006, pp. 4 pp.-843, doi: 10.1109/ICACT.2006.206094.
- [5] Fritzing circuit, https://fritzing.org/learning/tutorials/building-circuit (приступљено у јулу 2025.)
- [6] Custom Fritzing parts, https://learn.sparkfun.com/tutorials/make-your-own-fritzing-parts/what-is-fritzing (приступљено у јулу 2025.)
- [7] Embedded magnets in 3D print, https://docs.espressif.com/projects/esp-dev-kits/en/latest/esp32/esp32-devkitc/user_guide.html (приступљено у октобру 2025.)