APPLICATION OF SOFTWARE PACKAGE CIVIL 3D ON AN EXAMPLE OF ROAD SECTION RASKA-NOVI PAZAR (L~2km)

Authors

  • Владимир Михајловић Autor

DOI:

https://doi.org/10.24867/05CG05Mihajlovic

Keywords:

Road design, Civil 3D, reconstruction

Abstract

The paper presents an analysis of the possibilities of using the Civil 3D software package through the design phase of road reconstruction, its functionality and application, and the same was applied in a practical example on the section of the State Road IB 22, section Raska-Novi Pazar (L ~ 2km). The tools used  in the creation of the digital terrain model (DTM), defining the road alignment, longitudinal profile and road leveling, corridors, drawing cross sections and typical cross sections, forming a leveling plan, calculating quantities, etc. are described.

References

[1] Радовић, Н.: Одабрана поглавља из пројектовања путева (Скрипта са предавања и вежби, ФТН 2012- 2013).
[2] ЈП „Путеви Србије“: Приручник за пројектовање путева у Републици Србији.
[3] Цветановић, А, Банић, Б.: Коловозне конструкције.
[4] State of Florida Department of Transportation: FDOT Civil 3D Subassembly Composer Course Guide.
[5] Graham R., Holland L.: Mastering AutoCAD Civil 3D 2012.
[6] https://geoinova.com/index.php/yu/home-yu/2- uncategorised?start=8
[7] Путеви Србије www.putevi-srbije.rs

Downloads

Published

2019-11-21

Issue

Vol. 34 No. 12 (2019): Proceedings of the Faculty of Technical Sciences

Section

Civil Engineering