Proceeding of the Faculty of technical Sciences, Novi Sad

Electrotechnical and Computer Engineering

Vol. 37 No. 04 (2022): Proceedings of the Faculty of Technical Sciences

INDUSTRIAL COMMUNICATION PROTOCOLS IN MEDIUM AND HIGH VOLTAGE SUBSTATIONS

DOI:
https://doi.org/10.24867/17BE12Jovanovic
Submitted
October 19, 2021
Published
2022-04-07

Abstract

This document discusses the equipment located in the substation, with emphasis on protection relays and SCADA system. Communication principle between relays on substation level and communication between relays and SCADA system were described. Communication is based on the IEC 61850 protocol. MMS, GOOSE and Sampled Values principle of communication were described. By practical work, the circuit breaker failure protection was adjusted and GOOSE principle of communication was tested.

References

[1] S. Škuletić, Z. Sekulić, „Proizvodnja električne energije,” Zavod za udžbenike i nastavna sredstva, Podgorica, 2019.
[2] Dajana Cvijić, „GOOSE Komunikacija,” Master rad, Fakultet tehničkih nauka Novi Sad, 2020.
[3] Shawn Nick, „An investigation approach to test Protection Intelligent Electronic Devices (IEDs) in IEC 61850 based Substation Automation Systems (SAS) at Station level,” Science and Engineering Faculty, Brisbane, 2014.
[4] S. Sučić, A. Martinić, H. Keserica, „Utjecaj drugog izdanja IEC 61850 standarda na razvoj komunikacijske arhitekture elektroenergetskog sustava,“ Hrvatski ogranak međunarodne elektrodistribucijske konferencije, Umag, Hrvatska 2010.
[5] Matija Skelo, „Pregled komunikacijskih sustava u pametnim elektroenergetskim mrežama,“ Završni rad, Osijek, 2017.