CONNECTION OF CONTROL SYSTEMS IN INDUSTRIAL ENVIRONMENTS
DOI:
https://doi.org/10.24867/12IH02StojacicKeywords:
SCADA, PLC, DCS, fieldbusAbstract
In this paper are considered the influence of connection of control systems (SCADA, PLC and DCS) on overall performance of the controlled system. Also, basic characteristics and interconnections of SCADA, PLC and DCS are described.
References
[1] Stankovski, S., Ostojić, G., Zhang, X., Baranovski, I., Tegeltija, S. & Horvat, S.; Mechatronics, Identification Tehnology, Industry 4.0 and Education, Proceedings of the 18th INFOTEH-JAHORINA 2019, Ljuboje Z. (Ed.), IEEE, East Sarajevo, Bosnia and Herzegovina, DOI: 10.1109/INFOTEH.2019.8717775
[2] Stouffer, K., Falco, J., Kent, K.; Guide to Supervisory Control and Data Acquisition (SCADA) and Industrial Control Systems Security, NIST Special Publication 800-82, 2006
[3] Stankovski, S., Ostojic, G., Saponjic, M., Stanojevic, M. & Babic, M., Using micro/mini PLC/PAC in the Edge Computing Architecture, Proceedings of the 19th International Symposium INFOTEH-JAHORINA (INFOTEH), East Sarajevo, Bosnia and Herzegovina, 2020, pp. 1-4, doi: 10.1109/INFOTEH48170.2020.9066309.
[4] Stankovski, S., Ostojic, G., Baranovski, I., Babic, M. & Stanojevic, M.;The Impact of Edge Computing on Industrial Automation, Proceedings of the 19th International Symposium INFOTEH-JAHORINA (INFOTEH), East Sarajevo, Bosnia and Herzegovina, 2020, pp. 1-4, doi: 10.1109/INFOTEH48170.2020.9066341.
[5] Ostojić, G., Stankovski, S.; Skripta za Sisteme za nadzor i upravljanje, Fakultet tehničkih nauka, 2005.
[6] https://www.controleng.com/articles/automation-meets-edge-computing/
[7] Frank D. Petruzella; Programmable logic Controllers, Third Edition, Higher Education, Published by McCraw-Hill Companies Inc. New York, USA, 2005
[8] Arkadiusz Hulewicz1, Zbigniew Krawiecki, Krzysztof Dziarski,: Distributed control system DCS using a PLC controller, ITM Web of Conferences 28, 01041, 2019.
[9] https://www.plantautomation-technology.com/articles/an-overview-of-distributed-control-systems-dcs
[10] D. A. Poștovei, C. Bulac, I. Triștiu and B. Camachi, The evolution and challenges of modern Distributed Control Systems, 2020 IEEE 14th SACI, Timisoara, Romania, 2020.
[11] http://en.wikipedia.org/wiki/Modbus
[12] http://en.wikipedia.org/wiki/CAN_bus
[13] G. Ostojic, S. Stankovski, Z. Ratkovic, L. Miladinovic, R. Maksimovic, Development of hydro potential in Republic Srpska, Renewable and Sustainable Energy Reviews, Vol. 28, pp 196-203, 2013.
[14] D. Kukolj, G. Ostojić, S. Stankovski, S. Nemet, Technology Status Visualisation Using Patent Analytics: Multi-Compartment Refrigerators Case, Journal of Mechatronics, Automation and Identification Technology, Vol. 4, No.4, pp. 1-8, 2019.
[15] I. Baranovski, S Stankovski, G. Ostojić, S. Horvat, T. Srđan, Augmented reality support for self-service automated systems, Journal of Graphic Engineering and Design, Vol. 11, No. 1, pp 63-68, 2020.
[16] S. Nemet, G. Ostojić, D. Kukolj, S. Stankovski, D. Jovanović, Feature Selection Using Combined Particle Swarm Optimization and Artificial Neural Network Approach, Journal of Mechatronics, Automation and Identification Technology, Vol. 4, No.1, pp. 7-11, 2019.
[17] M. Jocković, Z. Ognjanović, S. Stankovski, Veštačka inteligencija: inteligentne mašine i sistemi, Krug, Beograd, 1988.
[2] Stouffer, K., Falco, J., Kent, K.; Guide to Supervisory Control and Data Acquisition (SCADA) and Industrial Control Systems Security, NIST Special Publication 800-82, 2006
[3] Stankovski, S., Ostojic, G., Saponjic, M., Stanojevic, M. & Babic, M., Using micro/mini PLC/PAC in the Edge Computing Architecture, Proceedings of the 19th International Symposium INFOTEH-JAHORINA (INFOTEH), East Sarajevo, Bosnia and Herzegovina, 2020, pp. 1-4, doi: 10.1109/INFOTEH48170.2020.9066309.
[4] Stankovski, S., Ostojic, G., Baranovski, I., Babic, M. & Stanojevic, M.;The Impact of Edge Computing on Industrial Automation, Proceedings of the 19th International Symposium INFOTEH-JAHORINA (INFOTEH), East Sarajevo, Bosnia and Herzegovina, 2020, pp. 1-4, doi: 10.1109/INFOTEH48170.2020.9066341.
[5] Ostojić, G., Stankovski, S.; Skripta za Sisteme za nadzor i upravljanje, Fakultet tehničkih nauka, 2005.
[6] https://www.controleng.com/articles/automation-meets-edge-computing/
[7] Frank D. Petruzella; Programmable logic Controllers, Third Edition, Higher Education, Published by McCraw-Hill Companies Inc. New York, USA, 2005
[8] Arkadiusz Hulewicz1, Zbigniew Krawiecki, Krzysztof Dziarski,: Distributed control system DCS using a PLC controller, ITM Web of Conferences 28, 01041, 2019.
[9] https://www.plantautomation-technology.com/articles/an-overview-of-distributed-control-systems-dcs
[10] D. A. Poștovei, C. Bulac, I. Triștiu and B. Camachi, The evolution and challenges of modern Distributed Control Systems, 2020 IEEE 14th SACI, Timisoara, Romania, 2020.
[11] http://en.wikipedia.org/wiki/Modbus
[12] http://en.wikipedia.org/wiki/CAN_bus
[13] G. Ostojic, S. Stankovski, Z. Ratkovic, L. Miladinovic, R. Maksimovic, Development of hydro potential in Republic Srpska, Renewable and Sustainable Energy Reviews, Vol. 28, pp 196-203, 2013.
[14] D. Kukolj, G. Ostojić, S. Stankovski, S. Nemet, Technology Status Visualisation Using Patent Analytics: Multi-Compartment Refrigerators Case, Journal of Mechatronics, Automation and Identification Technology, Vol. 4, No.4, pp. 1-8, 2019.
[15] I. Baranovski, S Stankovski, G. Ostojić, S. Horvat, T. Srđan, Augmented reality support for self-service automated systems, Journal of Graphic Engineering and Design, Vol. 11, No. 1, pp 63-68, 2020.
[16] S. Nemet, G. Ostojić, D. Kukolj, S. Stankovski, D. Jovanović, Feature Selection Using Combined Particle Swarm Optimization and Artificial Neural Network Approach, Journal of Mechatronics, Automation and Identification Technology, Vol. 4, No.1, pp. 7-11, 2019.
[17] M. Jocković, Z. Ognjanović, S. Stankovski, Veštačka inteligencija: inteligentne mašine i sistemi, Krug, Beograd, 1988.
Downloads
Published
2021-05-09
Issue
Section
Mechatronics
